Home Improvement @ dotindigi

You must be upset when selecting wood cabinets and doors difficult to open, barely a month when you buy it. Well, that was only one common complaints we encounter, but it is still often we find layers of paint peeling, cracked, bent, bent, broken, mildewed, and so on. You certainly do not want this to happen again to you instead?

Actually the cause of all the complaints are the quality of raw material before it is formed into a variety of goods. Specter is often due to the drying process is not perfect. Since the number of requests, finally craftsmen using only the new wood-aired diangin just 1-3 months. And for good natural drying, the craftsmen had time to dry wood in a matter of years.

With water levels still high, of course, possible to crack, split, and curled into a big right? Besides the material quality is often determined by the age cut. The younger the age, of course, more and more young fibers (pig) is contained in the material. Pig parts often become easy for the insects attack powder and termites. You can recognize the pig by observing the color of white fibers on the furniture. If more and more white than brown colors dominate, then the age would not furniturpun long and often you find that some parts of the curved or cracked.

There are a few tips before you buy furniture from wood. The first step is to observe the price. The more crooked timber when the price offered is the identity, you must be suspicious because the wood used is unlikely to experience the process of drying with an oven. If you want quality, look for the price of furniture at a fair price by comparing between stores.

The second step is to observe the percentage of pig in the furniture. Should choose a timber without a pig or if your wallet is not thick, choose the ratio of old wood 60: 40 pig. You can do this by considering some of the wood in passing. Once trained, you can immediately measure the quality of furniture on offer.

Pig is part of the wood cells that are young. This is marked by white color on the wood, like the wooden edges marked in the illustration above. When the pig is too much, your wood furniture vulnerable to attack by termites and the weather.

Well, it would be difficult to observe with a pig on the furniture dark finish. This is actually not difficult when you have to compare prices between stores. If the difference in distance, in fact you can guess the quality is not it?

When you do not have enough budget reserves, in fact you have the option to buy furniture from wood materials SUNGKAI, ramin, or Borneo. Generally furniture prices are cheaper than the identity and age of tree felling is usually old. It’s the beauty of the wood fibers must be less than teak, but the durability is better than even you buy a cheap identity.

In addition you can choose furniture from other materials, for example fiberglass, glass, plastic, particle board, MDF, or maybe even a combination of wood with a teak wood board. This latter quality is usually even better than you are forced to buy teak furniture with low quality.

The third step is conducted if you are still choosing materials as materials of teak furniture favorite. We recommend that you choose a straight grain. Avoid wooden eyes too much because even though